Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Gear shift extensions angle back and add about 5" of length to your stock shifter, which allows you to reach the shifter without leaning forward..
Gear shift extensions angle back and add about 5" of length to your stock shifter, which allows you to reach the shifter without leaning forward. With thread pitch of 10x1.5
Bus (Type 2): 55-67
No customer reviews for the moment.
Part #: 1101442
This is a shim that is used between the head and barrel.
Application:Part #: 152701062N
Floor Plate, Right, Convertible
Application:Part #: 022133083D
Y Fitting, Plenum to Booster & Decel
Application:Part #: 211611764B
These are the metal brake lines found throughout the car.
Application:Part #: 1707302
Stainless Steel Rear Bumper Overrider Set
Application:Part #: 1251202FL
This is the 3-bolt gasket that goes between the muffler and the header.
Application:Part #: N132421
Accelerator Lever Pivot Pin
Application:Part #: 14156631A
3 Hole to 5 Hole Steering Wheel Adapter
Application:Part #: 1117107
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 113827503A
This is the rear handle that opens the engine lid.
Application:Part #: 111827513B
This plate bolts onto the rear apron so your deck lid lock has something to hook to.
Application:Part #: 153863710
This is a full carpet kit.
Application:Part #: 113101353ECO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1405315
Type 1 2.5" Drop Spindles for 5/205 Disc Brakes Ball Joint Front End
Application:Part #: 1129201301
48mm/51mm IDA Carb Float Only
Application:
Gear shift extensions angle back and add about 5" of length to your stock shifter, which allows you to reach the shifter without leaning forward..
