Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This stock oil cooler cools the hot oil coming from the engine.
This stock oil cooler cools the hot oil coming from the engine. We recommend the doghouse style over the earlier one because the hot air exits the cooler and goes outside the engine compartment. The earlier cooler allows the hot air to go over the #3&4 cylinders, an inadequate way of cooling. Note: When installing the fan shroud over the doghouse cooler you should wrap a piece of foam over the top of the cooler to insure that air from the fan goes through the cooler and not around it. When it comes to oil cooler seals, we suggest you give us a call.
Bug (Type 1): 71-79
Bus (Type 2): 71-79
Ghia: 71-74
Thing: 73-74
Race/Off-Road: 71-79
No customer reviews for the moment.
Part #: 1117103
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 043115531A
Oil Filler with Cap
Application:Part #: 311115175A
This screen fits in the sump around the pick up tube.
Application:Part #: 1115610BL
Billet Dipstick, Blue
Application:Part #: 113115611
No, this isn't that distant cousin.
Application:Part #: 1115141
This oil pump cover comes with a threaded boss.
Application:Part #: N115244
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 111198029
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1117108ALF
These fittings are used for the stainless steel hose.
Application:Part #: JC22270
Jaycee Billet Oil Cap with Breater -10 AN Fitting, Blue
Application:Part #: 068115561B
Oil Filter use in place of HP1
Application:Part #: 1115141BL
This oil pump cover comes with a threaded boss.
Application:Part #: 1115109
This oil thermostat goes in line on your external oil cooler system.
Application:Part #: 1117011
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: 1115183BL
This plate is made out of a solid piece of aluminum. Blue
Application:Part #: JC22970
Jaycee Billet Full Flow Pump Cover w/ -8 O-ring Fitting, Red
Application:
This stock oil cooler cools the hot oil coming from the engine.
