Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This is the vinyl covering for the inside roof and sides of the Bug.
This is the vinyl covering for the inside roof and sides of the Bug. We suggest you take it to a professional for installation. The headliner installation is a difficult job and it takes a heat gun to get the wrinkles out. The part numbers are just the basic numbers. We will need to know the color and type of material you want. Please call for pricing. Brought to you proudly by TMI.
Bug (Type 1): 61-62
Off-Road: 61-62
No customer reviews for the moment.
Part #: 111101123
These pins position the main bearings in the case halves so you can line up the oil galley holes with the main bearings.
Application:Part #: 153863706
This is a full carpet kit.
Application:Part #: 211801505D
Inner Front Wheel Housing Panel, Left
Application:Part #: 113501283
If a rear axle bearing is bad, you will have excessive play in the rear wheel.
Application:Part #: 251843704E
This handle opens the side sliding door on Vanagons..
Application:Part #: 025115629A
Oil Dipstick Tube
Application:Part #: 343853343
Seal between Roof and Molding
Application:Part #: 1911021
This relay fits next to the starter and shortens the travel of amperage needed to engage the starter.
Application:Part #: 6821022N
These kits are really thick and have a great fitting hood.
Application:Part #: 141953166C
This seals the front turn signal housing from the fender.
Application:Part #: 111101461
These nuts and washers hold the heads on.
Application:Part #: 211867549
This is the vinyl covering for the inside roof and sides of the Bus.
Application:Part #: 151871917
The top staples to the rear bow.
Application:Part #: 113255965
Vent Cover Securing Clips
Application:Part #: 6801240A
Universal Billet Support Bracket, 1" clamps, measures 4 7/16"L x 3"H x 2 1/2"W
Application: