Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Inside Engine Lid Seal
Inside Engine Lid Seal
Type 3: 1961-74
No customer reviews for the moment.
Part #: n146841
Step stud
Application:Part #: 111511245E
This rubber "donut" goes around the spring plate, allowing it to move up and down.
Application:Part #: 211721361D
This tube goes from the metal tube coming out of the tunnel to the bracket on the transmission.
Application:Part #: 141857502A
These mirrors mount on the doors or door hinges so you can see what's behind you.
Application:Part #: 111937505M
This is a replacement fuse box.
Application:Part #: 111971108
The electrical harness runs everything on the car.
Application:Part #: 071251185A
Tail pipes route the exhaust out of the back of the stock muffler..
Application:Part #: 111863503
The part numbers are just the basic numbers you will need to tell us; what color you want and what kind of material.
Application:Part #: 111711141BK
This is the knob on top of the shifter..
Application:Part #: 111721507F
This is the pedal that works the throttle.
Application:Part #: 113953163A
Chrome Housing for Turn Signals, Each
Application:Part #: 111837231
Door Handle/Window Crank Buffers - Inside Anit-rattle buffer
Application:Part #: 6401023B
These clamps are made to go around your front axle beam and are used when building rail cars or stiffening up the front head of a baja Bug..
Application:Part #: N133281
Heater Knob Roll Pin
Application:Part #: 1119527CH
This tin goes from one piece of cylinder tin to the other.
Application: