Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This coupler joins the shift rods. Heavy Duty
This coupler joins the shift rods. The nice thing about this coupler is that it lasts longer than a stock coupler, but the draw back is that it transmits more noise then the stock one. Note: Make sure you safety wire the set screw(s) after you've tightened it up. Heavy Duty applications.
Bug (Type 1): 65-79
Bus (Type 2): 68-79
Type 3: 65-74
Ghia: 65-74
Thing: 73-74
Race/Off-Road: 65-79
No customer reviews for the moment.
Part #: 1711176INS
Replacement inserts for Urethane Shift Rod Couplers
Application:Part #: 6251014M
SS Racing Muffler Only with Mounting Clamps
Application:Part #: 211837501
This is the mechanism that makes the window go up and down.
Application:Part #: 001301209A
Nose Cone Seal Holder
Application:Part #: 186360211
These ride on the tunnel from the shifter forward.
Application:Part #: 111721555A
This cable operates the carburetor(s).
Application:Part #: 1115449SM
Replacement Oil Cap Billet Smooth
Application:Part #: 113707177W
Front Bumper Bow, US Style
Application:Part #: 113857207A
This is the grill you stare at while you are driving down the road.
Application:Part #: 6823496
These fasteners take some time to put in, but they're worth the effort. Formed Tab w/ 3/8"-24 Nutplate
Application:Part #: 151837627
For convertibles, this is the upper pin that the vent wing pivots on.
Application:Part #: 111821306Q
These are new rear fenders.
Application:Part #: 141853535A
This is the chrome trim that went on the front and sides of the Ghia to dress it up.
Application:Part #: 311943131
This is the lens and seal for the light that shines on the license plate.
Application:Part #: 1119352CH
These three pieces of tin go from the heater boxes to the case.
Application:Part #: 113857514DQ
Outside Mirror, Right
Application:
This coupler joins the shift rods. Heavy Duty