Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These diffs add two more spider gears to your differential, plus the housing is way stronger then stock.
These diffs add two more spider gears to your differential, plus the housing is way stronger then stock. On swing axle diffs you have two choices; threaded or snap ring. The threaded diffs hold the axles better then the snap ring, however you have to pull the whole center section of the trans apart to replace an axle. Diffs do not come with the extra spider gears you need, so you will have to get those as well. Last but not least, you have to know what your doing to set one of these up, and we suggest you take it to someone who has experince in setting up ring and pinions. We highly reccomend these diffs for those of you with big motors.
Bug (Type 1): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 111398003
Transmission gasket set.
Application:Bug (Type 1); -60
Bus (Type 2); -59
Ghia; -60
Part #: N122391
Transmission Cradle Bolt Washer
Application:Part #: 111301257
Transmission Horn Bolt
Application:Part #: 111501131
This kit contains all of the gaskets needed to rebuild a transmission.
Application:Part #: 113517191
Swing Axle Fulcrum Plates
Application:Part #: 311301265A
These rubber mounts hold the transmission in place.
Application:Part #: 111301289B
This boot goes around the nose cone to seal up the hole where it comes through the pan.
Application:Part #: 211301265AFA
Transmission mount, front, mid
Application:Part #: 1301048I
Padded Trans Support Front Kit
Application:Part #: 1311123
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.
Application:Part #: 001301209A
Nose Cone Seal Holder
Application:Part #: 111301289
Nose Cone Boot
Application:Part #: 211301265A
These rubber mounts hold the transmission in place.
Application:Part #: 1301266
Trans Axle Adapter Kit
Application:Part #: 1301150
Bolt on Center Transmission mount, Urethane stops included
Application:Part #: 113517289A
These are the seals that go around the final drives on an IRS transmission.
Application:
These diffs add two more spider gears to your differential, plus the housing is way stronger then stock.
