Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Billet Side Drilled Bracket 3.5" Wide, 1.75" Tubing
Billet Side Drilled Bracket 3.5" Wide, 1.75" Tubing
Offroad/Race: All
No customer reviews for the moment.
Part #: N141212
These are the latches that hold the popout frame out.
Application:Part #: 151871349A
This sels the leading edge of the top to the front window frame..
Application:Part #: 111953193
This seals the front turn signal housing from the fender.
Application:Part #: 1198090ACH
90.5mm Pistons & Cylinders - 69mm Stroke CHINA
Application:Part #: 111831421E
These pins are in the door hinges.
Application:Part #: 211837349A
Door Check Rod Seal, Pair
Application:Part #: 1129201304
Replacement Float for EMPI EPC 32/36A, E, M, EPC 38, Each
Application:Part #: 311837209
This seal goes between the handle and the body.
Application:Part #: 211971028FC
Complete Wiring Harness
Application:Part #: 2847431
Side Weld in Tabs For Rear Safari
Application:Bus (Type 2); 55-79
Part #: 113415835
These are the ball joints on the tie rods.
Application:Part #: 021119249E
Aluminum Ignition Timing Scale
Application:Part #: 1407182
This is almost a must for Super Beetles.
Application:Part #: 311798119
This coupler attaches the shift rod to the transmission.
Application:Part #: 211698301
This kit is for rebuilding the wheel cylinder.
Application:Part #: 113141701C
This shaft holds the throw-out bearing in place.
Application:
Billet Side Drilled Bracket 3.5" Wide, 1.75" Tubing