Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Passenger Side Roof Handle
Passenger Side Roof Handle
No customer reviews for the moment.
Part #: 6251000
These systems work well with a single carb set up as they have provisions for the heat riser.
Application:Part #: 211703475C
This support goes inbetween the main frames of your Bus.
Application:Part #: 6601154
These caps are made to dress up your wheels..
Application:Part #: 1827027
Rain deflectors allow air into your engine compartment to cool it, but still keep the rain out.
Application:Part #: 211845101E
These are cut from safety glass as required by law.
Application:Part #: 113857635C
Coat Hook Metal Bracket
Application:Part #: 1251010CC
Hide Out Muffler Ceramic Coated
Application:Part #: 6301150A
Type 2 Transmission Center Mount Only
Application:Part #: 113857050A
These are the padded dashes that came on the 1968 and later Bugs.
Application:Part #: 211801052HR
This area tends to rust.
Application:Part #: 211405625
These bearings go in the drum or rotor hub to allow them to spin.
Application:Part #: 151871043C
This boot keeps the wind from ripping up your top when it is down.
Application:Part #: 111711149B
Shifter Stop Plate
Application:Part #: 2498211A
Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard. These spindles will give you the stock ride and give you that lowered stance. They are sold on an exchange basis and come with new king pins. They do NOT come with link pins, so look at yours to see if you need new ones. Most of the time you do not need new ones as...
Application:Part #: 110940114P
Pauter 1.4 Ratio Roller Rockers PR
Application:Part #: 6721357
Heim End for EMPI Slave with 3/8" Ball
Application: