Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Vent Wing window Upright Seal
Bug (Type 1): 10/52-64
Vent Wing window Upright Seal
No customer reviews for the moment.
Part #: 151801131B
These are the replacement rails for convertibles.
Application:Part #: 141837035B
Driver Side Door Stricker Plate
Application:KG; 67-74
Part #: 1881021
We really like the style and comfort that these seats provide.
Application:Part #: 151847365A
Window Sash for Rear Quarter Window, Left, Convertible
Application:Part #: 241707420
Bumper Rubber Insert for Deluxe Bus Bumpers
Application:Part #: 211813356D
Rear Corner to Roof, Right
Application:Part #: 211415049HCO
CORE CHARGE If you would like to order this before sending your old steering box in, please add this part number to your order. This is the core charge. Once you send back your old steering box we will refund this amount, providing your steering box is good.
Application:Part #: 1B09001BL
These are like the transparent caps, not that great but they look cool.
Application:Part #: 311819467
These are the little vents near the rear window to keep it from fogging up.
Application:Part #: 1109341OR
Replacement O-Ring Set 16 pieces
Application:Part #: 2501102
This converts all 1967 and prior buses to independent rear suspension.
Application:Part #: 111301255A
Transmission Cradle Mount Bracket
Application:Part #: 311101353ACO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 2707291
This is a nice repro of the original front bumper step.
Application:Part #: 6698110RT
Rebuild Kit for 3/4" Angled Turning Brake 7/8" clutch- 7/8" Brake master Cylinder
Application:Part #: 1115193
This plug for the bottom of the sump plate has a magnet in it.
Application:
Vent Wing window Upright Seal
Bug (Type 1): 10/52-64