Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is just a cover that fits around a 30amp generator to give it that chrome look.
This is just a cover that fits around a 30amp generator to give it that chrome look. It will only fit 30amp 12volt generators.
Bug (Type 1): 1500-1600
Bus (Type 2): 1500-1600
Type 3: 1500-1600
Ghia: 1500-1600
Offroad: 1500-1600
No customer reviews for the moment.
Part #: 043903109GR
This is the pulley on the generator that holds the belt.
Application:Part #: 111903137B
This is the belt that turns the generator.
Application:Part #: 1903141
This chrome strap holds the alternator or generator to the stand.
Application:Part #: 1903141B
This strap is much stronger than the stock strap, not that you need a super strap to hold the alternator or generator.
Application:Part #: JC86010
Jaycee Billet Alternator Pulley, Black
Application:Part #: 113119031A
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: 1301104
This bushing is made to mate mismatched bellhousing and starter combinations.
Application:Part #: 111903515A
These are the bearings and brushes for your generator.
Application:Part #: 111903131A
Probably the most common cause of generator pulleys coming apart is the shortage of shims.
Application:Part #: 113903141A
The generator strap goes around the generator and holds the generator to the stand..
Application:Part #: 043903109BR
This is the pulley on the generator that holds the belt.
Application:Part #: 1903109POL
Polished Billet Alternator/Generator Pulley Kit
Application:Part #: 1903109BL
Billet Alt/Gen Pulley Blue
Application:Part #: 1903183
This aftermarket chrome cap nut and spacer hold the alternator/generator pulley on.
Application:Part #: 1903109BOBL
Billet Pulley Outer Half Blue
Application:Part #: 111903137D
This is the belt that turns the generator.
Application:
This is just a cover that fits around a 30amp generator to give it that chrome look.
