Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Convertible Top Chrome Molding Kit
Convertible Top Chrome Molding Kit
Bug (Type 1): -60
No customer reviews for the moment.
Part #: 1905250B
This aluminum clamp holds the distributor in time, as well as holding it onto the case.
Application:Part #: 141831401C
Karmann Ghia Left Upper Door Hinge
Application:Part #: 213707225
Bumper Guard Support Tubes, Front, Sold as a pair
Application:Part #: 1198090ACH
90.5mm Pistons & Cylinders - 69mm Stroke CHINA
Application:Part #: 1129505002
These are some of the most common jets used.
Application:Part #: 211953141J
These are the lenses that go over the front turn signal bulb holders.
Application:Part #: 1109401125SC
1.25 Ratio Rockers Pro SCAT
Application:Part #: 111941119
This seal goes in the headlight buckets.
Application:Part #: 131863503
The part numbers are just the basic numbers you will need to tell us; what color you want and what kind of material.
Application:Part #: 113867000
Headliner Install Kit
Application:Part #: 211798001A
Accelerator Pedal Repair Kit
Application:Part #: 111105209
CRANKSHAFT GEAR, timing, 36hp engines
Application:Part #: F1405
These are the glues and oils we use..
Application:Part #: 211405671
Front Wheel Bearing Nut, Left, 32mm
Application:Part #: 311401301C
Lower Outer Needle Bearing For Front Beam (2 required)
Application:Part #: 6415811B
Tapered Chromoly Bung, mainly used for fabricating Tie Rods on Offroad/Race Applications. Thread 3/4"-16 LH
Application:
Convertible Top Chrome Molding Kit
