Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
This piece of tin goes behind the engine towards the flywheel and screws down to the cylinder tins. The doghouse tin has a hole in the back of it for the ducting tin to fit into. This is used in conjunction with the other doghouse tins, and fan shroud.
No customer reviews for the moment.
Part #: N115244
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1119027CH
This small fan shroud came on the 36hp motor.
Application:Part #: 1117323
Hoover Bit
Application:Bug (Type 1); 1600
Bus (Type 2); 1600
KG; 1600
Thing; 1600
Offroad/race car; 1600
Part #: 1119028CH
This small fan shroud came on the 36hp motor.
Application:Part #: 1119100
These plugs fit into the fan shroud, plugging off the heater ducts.
Application:Part #: 1119027BK
This small fan shroud came on the 36hp motor.
Application:Part #: 111119571
In the stock front pulley tin, there is a hole for the 1" hose coming down from the stock air cleaner.
Application:Part #: 1903031CH
This is one of the three-pieces of the Alternator or Generator Tin Set, it's the large flat plate that is seen.
Application:Part #: 1903032CH
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: 1119527CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119303BK
These cylinder head tins sit under the fan shroud.
Application:Part #: 311119317A
These are also known as the "forget-me-nots".
Application:Part #: 1119026CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1119517BK
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 1119303CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 1903032
These are the three pieces of tin that go on the back of the generator or alternator.
Application:
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
