Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These stock-style tubes are made of stainless steel.
These stock-style tubes are made of stainless steel. Use them on all 1300 to 1600cc engines. If you take the heads off, you should replace the old tubes with new ones.
Bug (Type 1): 1300-1600
Bus (Type 2): 1300-1600
Type 3: 1300-1600
Ghia: 1300-1600
Thing: 1300-1600
Race/Off-Road: 1300-1600
No customer reviews for the moment.
Part #: JC91020
Jaycee Leak proof Pushrod Tubes, Black
Application:Part #: 1109339
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:Part #: 1109006
These gears give just a hair more horsepower.
Application:Part #: 113109309C
These ride against the cam. Sold each. You will need 8 to do an engine
Application:Part #: 1109305
Aluminum Smith Bros. Push Rods
Application:Part #: 111101401B
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: JC91030
Jaycee Leak proof Pushrod Tubes, Blue
Application:Part #: 1109399
1.25 Ratio Rockers ONLY
Application:Part #: 1109642
If you are going to run dual springs we suggest you use these valve spring retainers as well.
Application:Part #: 11094011
Rocker Arms Kit, HP Stock 1.1
Application:Part #: 311109335
These tubes go from the case to the heads to house the push rods.
Application:Part #: 111109601A
Intake Valve 30mm (each)
Application:Part #: 043109611A
The two outside valves in the head are the exhaust valves, they let the burned fuel out of the head.
Application:Part #: JC91000
Rebuild kit for Jaycee Leak proof Pushrod Tubes
Application:Part #: 1109406
These shims are used with the Solid Shaft Rocker Kit.
Application:
These stock-style tubes are made of stainless steel.
