Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Flywheel Shim 25-36HP, .24mm (0.01")
Flywheel Shim 25-36HP, .24mm (0.01")
Bug (Type 1): 25-36 HP
No customer reviews for the moment.
Part #: 1823022
This is a dress-up kit for the front and rear air intakes on your bug..
Application:Part #: 151947511A
Interior Light Switch
Application:Part #: 144867501
This is the vinyl covering for the inside roof and sides of the Ghia.
Application:Part #: 315198163A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 1701060
Metal Battery Tray
Application:Part #: N200223
Rear Apron Plug/ Anti Rattle/ Bus Cargo Floor
Application:Part #: 211711331
Bus Parking Brake Cable Sleeve
Application:Part #: 111831421E
These pins are in the door hinges.
Application:Part #: 6601035RD
Bead Lock Ring, No Hardware, RED Powder Coat
Application:Part #: 028109453
This screw rides against your valve, opening and closing it.
Application:Part #: 029105245B
This seal goes behind the flywheel.
Application:Part #: F1610
These are the glues and oils we use..
Application:Part #: 111941141
Headlight Adjusting Screw
Application:Part #: 021198481ABR
The crankshaft rides in the main bearing.
Application:Part #: 111957397
This holds the dash lights into the speedo head.
Application:Part #: 1115351OR
O-Ring Kit for Spin on Filter (System One)
Application:
Flywheel Shim 25-36HP, .24mm (0.01")
