Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Heavy Duty Clutch Pressure Plate - 1700lbs. This is made by KEP
We only offer brand new pressure plates because so-called rebuilt pressure plates never quite come up to factory pressure specs. We use a 1700 lbs pressure plate on most big-engine daily drivers. Heavier ones should only be used on your "Friday-Saturday night, race" car. This will work on the early throw out bearing as well as the late on. To use it with the late throw out bearing you just remove the collar in the middle.
No customer reviews for the moment.
Part #: 111141719HD
Clutch Cable Arm Forged for 20mm Cross shaft
Application:Part #: 111721305C
This is the shaft that the clutch pedal attaches to.
Application:Part #: 111141719F
Clutch Cable Arm Forged for 20mm Cross shaft
Application:Part #: 1141027
Kennedy Stage 3 Pressure plate 2600 LB
Application:Part #: 211141025A
Clutch Cover, 12 volt 200mm, 9 spring
Application:Part #: 311141025C
The clutch cover is also known as a pressure plate.
Application:Part #: 113141165B
Also known as a throw-out bearing, this bearing's function is to disengage the clutch.
Application:Part #: 113198026
This kit contains a bushing, a clutch return spring and the retaining clips to install the throw-out bearing shaft in the transmission.
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1141026
We only offer brand new pressure plates because so-called rebuilt pressure plates never quite come up to factory pressure specs.
Application:Part #: 111721329
Clutch Pedal Shaft Bracket
Application:Part #: 111141031E
This disc transfers the power from the motor to the transmission.
Application:Part #: 1141030
200mm 6 puck Clutch Disc
Application:Part #: 1141031
These clutch disc do not slip.
Application:Part #: 113141701C
This shaft holds the throw-out bearing in place.
Application:Part #: 1141701B
This heavy duty arm is a good idea if you need a new clutch arm.
Application:
Heavy Duty Clutch Pressure Plate - 1700lbs. This is made by KEP
