Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Tank Breather Hose 10mm ID, per foot
Tank Breather Hose 10mm ID, per foot
Bus (Type 2): 68-79
No customer reviews for the moment.
Part #: 111511255B
Spring Plate Covers, Pair
Application:Part #: 211829233
Rear Hatch Button Seal
Application:Part #: 111405691B
This is the cap that goes on the outside of the drum; covering up your bearing.
Application:Part #: 1119303BK
These cylinder head tins sit under the fan shroud.
Application:Part #: 1129605EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1601132
14mm VW Style Lug Bolt with 17mm Head Set of 5
Application:Part #: 221847081D
These are the latches that hold the popout frame out.
Application:Part #: 211801506D
Inner Front Wheel Housing Panel, Right
Application:Part #: 04038
These are the parts found in the distributor.
Application:Part #: T1115107
This tool pulls out the oil pump with out marring the case like pry bars do..
Application:Part #: 111711629B
Heater cables open the flaps in the heater boxes allowing heat into the car.
Application:Part #: 1105256BK
Standard Size Pulley w/ Bolt On Sand Seal Kit
Application:Part #: 111701255B
The shift rod guide holds the shift rod bushing.
Application:
Tank Breather Hose 10mm ID, per foot