Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These covers look good but have a tendency to leak.
These covers look good but have a tendency to leak. We suggest using Channel Style or Racing Aluminum Valve Covers.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 1101353
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 311198069F
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 1198161TS
90.5mm Piston Rings 1.5x2x4 Total Seal
Application:Part #: 043101457
These nuts and washers hold the heads on.
Application:Part #: 1107434
Not our favorite type of piston pin keeps.
Application:Part #: 111101481
This gasket goes between the valve cover and the head.
Application:Part #: 1198159
These rings are cast iron.
Application:Part #: 1101474
These covers look good but have a tendency to leak.
Application:Part #: 111101401B
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 1109604
Valve seats are used in the big valve heads.
Application:Part #: 1101475CH
These are just stock valve covers that are chrome.
Application:Part #: 1198092BWCH
92mm Pistons & Cylinders Thick Wall set with a 82mm Stroke CHINA
Application:Part #: 1107431
There are two types of keepers we like to use.
Application:Part #: 1101442
This is a shim that is used between the head and barrel.
Application:Part #: 1198083
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1198162
These rings are cast iron.
Application:
These covers look good but have a tendency to leak.