Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Front Bumper Center Section Only, Primer finish
Front Bumper Center Section Only, Primer finish
Bus (Type 2): 68-72
No customer reviews for the moment.
Part #: 211837225ABG
These handles go on the inside of the front doors to open them.
Application:Part #: 113863011
These are the interior panels.
Application:Part #: 211415049FWG
If you have a lot of play in the steering don't just assume the steering box is bad. ******Due to the lack of cores that we have to rebuild, we require the core to be sent up front before we will send out a rebuilt box***
Application:Part #: 025101177
Cylinder Liner O-Ring
Application:Part #: 211837475
The front door window rolls up and down between two rubber seals. This is the inner one.
Application:Part #: 211405521B
Kits contain the pins, bearings and shims which attach the spindle on king and link front ends to the axle beam.
Application:Part #: 111955425B
We carry Bosch blades for Bugs 1965 on.
Application:Part #: 211881897A
Front Passenger Seat Rubber Stop, 1 per bus
Application:Part #: 3129510A
1 3/4" EPC/ICT Type 3 and 4 Hexrod Assembly Linkage
Application:Part #: 211711169A
This coupler attaches the shift rod to the transmission.
Application:Part #: 111971117
The electrical harness runs everything on the car.
Application:Part #: T6401023
Tow Strap w/Hooks, 3.5"wide x 13' long, 10,000lbs capacity. A great idea to keep one of these in your car.
Application:Part #: 1823319
These replace the stock front hood spring with a gas charged strut.
Application:Part #: 111941543G
Cap for headlight knob
Application:Part #: 1129025
This is a new aftermarket UNIVERSAL intake manifold for Dual Port Engines. You can use a 30 Pict1 or 34Pict3 Carburetor. We have had major icing problems with this part and prefer stock manifolds.
Application:
Front Bumper Center Section Only, Primer finish
