Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N141212
These are the latches that hold the popout frame out.
Application:This is a great way to increase the oil capacity of your engine.
This is a great way to increase the oil capacity of your engine. Bolting on this sump will add 3.5 quarts of oil to your system. An oil sump eliminates oil starvation and increases cooling by keeping the oil cycle time down. Sumps are cast from aluminum for maximum heat disipation. We highly reccomend using an oil sump.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
No customer reviews for the moment.
Part #: 111115487
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 1115467HO
This is a breather box that will give excess "blow by" a place to go.
Application:Part #: 1117106
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115449BL
Replacement Oil Cap Billet Blue
Application:Part #: 1115467
This is a breather box that will give excess "blow by" a place to go.
Application:Part #: 1115110
These thermostats turn your electric fan on automatically.
Application:Part #: 1117101ALF
These fittings are used for the stainless steel hose.
Application:Part #: 1115457BK
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Black
Application:Part #: 111115475A
Oil Filler Seal, 25-36 HP
Application:Part #: 1115183BK
This plate is made out of a solid piece of aluminum. Black
Application:Part #: 311115541
This boot goes on the end of the dump tube.
Application:Part #: 1117699
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:Part #: 1115351
This is the last oil filter you will ever buy.
Application:Part #: N110623
Some of the more common nuts you might need..
Application:Part #: 1117108
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115420
This is one way to adjust your oil pressure.
Application: