Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are studs and nuts for different types of wheels.
These are studs and nuts for different types of wheels. When using screw in studs, use loctite on the threads that go into the drum and a spot of grease or anti sqeeze on the nut threads. We have seen alot of times when the studs screw into far and wipe out your brakes.
Bug (Type 1): -67
Bus (Type 2): 55-67
Type 3: 62-65
Ghia: 55-65
Race/Off-Road: -67
No customer reviews for the moment.
Part #: 6401023B
These clamps are made to go around your front axle beam and are used when building rail cars or stiffening up the front head of a baja Bug..
Application:Part #: 211615108ACO
Front calipers hold the brake pads that stop the rotor, which in turn stops your vehicle.
Application:Part #: 1198092BWCH
92mm Pistons & Cylinders Thick Wall set with a 82mm Stroke CHINA
Application:Part #: N111531
Valve Adjusting Nut 9mm
Application:Part #: 113953041N
This is the whole unit, lens and bulb holder.
Application:Part #: 211813227
This is a repair panel for the area above the engine lid.
Application:Part #: 211943165
This holds the bulb for the license plate in the engine deck lid.
Application:Part #: 213707155A
Front Bumper Guard
Application:Part #: 1857101
This durable, plastic box replaces the stock cardboard glovebox.
Application:Part #: 311853587B
These are the clips that hold the various chrome moldings on.
Application:Part #: 211837257B
Door check rod pin
Application:Bus (Type 2); 77-79
Part #: 1845201SASHS
This kit comes with everthing you need to eliminate your vent window, tempered glass, felt window channels, inner and outer snap in scrappers.
Application:Part #: 1129511
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 6129650476R
Outerwear pre-filters feature a patented; Micro Mesh nylon filtration system that stops sand and dirt before it gets to your air cleaner element.
Application:Part #: 211813355GWW
Rear Lower Corner, Left, from bottom to beltline
Application:Part #: 113857050B
These are the padded dashes that came on the 1968 and later Bugs.
Application:
These are studs and nuts for different types of wheels.