Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are studs and nuts for different types of wheels.
These are studs and nuts for different types of wheels. When using screw in studs, use loctite on the threads that go into the drum and a spot of grease or anti sqeeze on the nut threads. We have seen alot of times when the studs screw into far and wipe out your brakes.
Bug (Type 1): -67
Bus (Type 2): 55-67 With wheel adapters
Ghia: 56-65
Race/Off-Road: -67
No customer reviews for the moment.
Part #: 211611483
This valve in the wheel cylinder allows you to bleed the brakes.
Application:Part #: 141945177C
This seal goes between the tail light housing and the body of the car..
Application:Part #: 1129729BKKIT
Dual Port Installation Kit utilizing Black Urethane Boots
Application:Part #: 111105719A
Rod Bearings .30
Application:Part #: 022109309
These ride against the cam.
Application:Part #: 1101357
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 261829575
These rubber buffers go on the gates and body of single and double cab Buses to prevent the gates from banging into the body.
Application:Part #: 111012525BK
If you don't have a cigarette lighter, you will need to drill a hole in the dash.
Application:Part #: 1601103A4
Screw in Wheel Studs M14-1.5 commonly found in 4x130 applications
Application:Part #: 311415812C
These are the ball joints on the tie rods.
Application:Part #: 211955409B
The arms extend from the shaft to hold the wiper blades, very rarely do they fail..
Application:Part #: 2517289
These seals fit into the CV joint flange to keep the axle from beating the transmission cup and to keep the transmission oil out of the CV joint.
Application:Part #: 141953165B
This seals the front turn signal housing from the fender.
Application:Part #: 151857501B
These mirrors mount on the doors or door hinges so you can see what's behind you.
Application:Part #: 211415669
Deluxe Horn Button
Application:Part #: 141707181
Front/Rear Bumper Overrider Base Seal
Application:
These are studs and nuts for different types of wheels.