Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Truck rear corner right
Welding required
No customer reviews for the moment.
Part #: 113857551AWH
These are the visors you pull down to keep the sun out of your eyes.
Application:Part #: 1141701B
This heavy duty arm is a good idea if you need a new clutch arm.
Application:Part #: 111115107B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 029198075
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 61316
These stock pumps pump fuel into the carburetor.
Application:Part #: 113853535BSL
Body Molding Kit
Application:Part #: 111721555A
This cable operates the carburetor(s).
Application:Part #: T1129026
This meter is used for synchronizing your dual carburetors.
Application:Part #: 6801200
These tabs are used for mounting just about anything to tubing..
Application:Part #: 1615111
Rear Disc Brake Kit With E-Brake, 5x130 w/ 14x1.5mm threads or 5x4.75" w/ 12mm threads, Swing Axle
Application:Part #: 211841081A
Cargo Door Skin, Lower Front to Waistline
Application:Part #: 6721356A
Slave Cylinder Trans Bracket for Type 1 Transmissions
Application:Part #: 1101354
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1707134R
If you have a 1968 through 1973 bug and want the eariler style bumpers on it, these are the brackets that will get you there..
Application:Part #: 021109349B
These are the seals that go around the push rod tubes.
Application:Part #: 1953161
This bumper is perfect for 1968-73 cars when the turn signals have been shaved off the front fenders.
Application:
Truck rear corner right
