Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Hoover Bit
Bug (Type 1); 1600
Bus (Type 2); 1600
KG; 1600
Thing; 1600
Offroad/race car; 1600
This is a piece of sheet metal that bolts to the dog house style oil cooler, when using an aftermarket fan shroud. It is needed as the fan shrouds are not made right in this area and air that is supposed to go through the cooler will be exiting on the top of the case if you do not have this.
No customer reviews for the moment.
Part #: 111837475B
The front door window rolls up and down between these two rubber seals.
Application:Part #: 311819467
These are the little vents near the rear window to keep it from fogging up.
Application:Part #: 211703134
Outrigger, Right Rear
Application:Part #: 6415049A
This is the Bearing for the shaft is for the steering on tube style cars.
Application:Part #: 6857647
Billet Side Steps, Short (12.75" OAL), 1/2" x 13 threads, Each
Application:Part #: 211813363A
Just behind the rear tire.
Application:Part #: 211971115
The electrical harness runs everything on the car.
Application:Part #: 6601040
Offroad Wheel, 15"x4", 5x205 bolt pattern
Application:Part #: 1837475B
This kit comes with everthing you need to eliminate your vent window, tempered glass, felt window channels, inner and outer snap in scrappers.
Application:Part #: 311251061F
This is the exhaust silencer.
Application:Part #: 111511245E
This rubber "donut" goes around the spring plate, allowing it to move up and down.
Application:Part #: N110085
Some of the more common nuts you might need..
Application:Part #: 1711175
This coupler joins the shift rods.
Application:Part #: 111711717D
Heater cables open the flaps in the heater boxes allowing heat into the car.
Application:
Hoover Bit