Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the bushing between the bellhousing of the transmission and the starter.
This is the bushing between the bellhousing of the transmission and the starter. If you have the starter out, it's a good time to check the bushing. Note: When installing a starter, be sure you grease the bushing to prolong it's life.
Bug (Type 1): -66
Bus (Type 2): -66
Type 3: -66
Ghia: -66
Race/Off-Road: -66
No customer reviews for the moment.
Part #: 111301289B
This boot goes around the nose cone to seal up the hole where it comes through the pan.
Application:Part #: 1301265
These mounts made of urethane never wear-out.
Application:Part #: 211301205H
This is the front of the transmission that houses the shift lever.
Application:Part #: 113311113A
This seal goes around the mainshaft.
Application:Part #: 1301048
These straps are a good idea if you have a car with a big engine. We highly recomend that you use these in conjunction with the urethane transmission mounts.
Application:Part #: 1517122
These diffs add two more spider gears to your differential, plus the housing is way stronger then stock.
Application:Part #: 113713145A
The points that are in the shifter that disengage the transmission..
Application:Part #: 1301048I
Padded Trans Support Front Kit
Application:Part #: 1301266
Trans Axle Adapter Kit
Application:Part #: 113701173
This bracket is part of the torsion housing.
Application:Part #: 6501141
These retainers help stiffen the plates that bolts the tubes to the trans.
Application:Part #: 111301255A
Transmission Cradle Mount Bracket
Application:Part #: 001301209A
Nose Cone Seal Holder
Application:Part #: 001301207
Nose Cone Bushing, Rear, Late
Application:Part #: 001301083B
This seal keeps the fluid in the converter.
Application:Part #: 001301209C
Nose Cone Seal Holder
Application:
This is the bushing between the bellhousing of the transmission and the starter.
