Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
.
Bug (Type 1): 1600
Ghia: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 315198163A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 1101344
36 HP Barrel Shims .040 (4)
Application:Part #: 1101481
These are great valve covers gaskets.
Application:Part #: 1101477BL
These covers look good but have a tendency to leak.
Application:Part #: 113101353ECO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1109398
These rocker studs are much stronger than the stock studs and are .100" longer to allow more flexibility when setting your rocker arm geometry..
Application:Part #: 1101475CH
These are just stock valve covers that are chrome.
Application:Part #: 021101457
These nuts and washers hold the heads on.
Application:Part #: 111198057A
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 113101355A
New dual port head
Application:Part #: 1109512
Valve seats are used in the big valve heads.
Application:Part #: 1101381
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101472
If you like clip on valve covers these are the best that we have seen.
Application:Part #: 311101353ACO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1198092A
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1198161
These rings are cast iron.
Application:
.
