Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These two boots connect the intake manifold with the end casting on a stock dual port 1600cc engine. It's a good idea to replace them if you have the manifold apart. These are probably the number one source of intake leaks on dual port motors. We have tried the split boots and aren't pleased with them because they tend to leak. It's worth the effort to put the stock boots on. Note: Squirt some oil on the inside of the boots for easier installation.
Bug (Type 1): 1600
No customer reviews for the moment.
Part #: 043129707
Intake Manifold Block
Application:Part #: N138211
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 043129617A
Air Intake Boot for Fuel Injection
Application:Part #: 111127531A
6mm Fuel Line Ferrule
Application:Part #: 1129702
EMPI EPC 34 or ICT Manifold kit for Dual Port Type 1 Engines
Application:Part #: 1129709
This pair of aluminum end castings are for use with a center section manifold.
Application:Part #: 1129729BK
These boots are better than stock.
Application:Part #: 113129709D
Dual Port Manifold End Casting - Left
Application:Part #: VCP12
This is a rubber plug that is used to plug off vacuum.
Application:Part #: 1129701W
EMPI Deluxe Dual HPMX or IDF Manifold kit
Application:Part #: 113129651
This rubber hose goes from the oil breather to the stock air cleaner..
Application:Part #: 1129604EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 113127303
The fuel pump sits on this little stand and it's also the guide for the push rod.
Application:Part #: 1127101ALM
This is stainless steel braided fuel line.
Application:Part #: 113127521AWG
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 1129606
This air cleaner takes the place of a stock air cleaner.
Application: