Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is stainless steel braided fuel line.
This is stainless steel braided fuel line. We do not recommend this line unless you are using the screw in fittings everywhere. Don't use clamps because they're too loose and might come off. The hose size is 6AN.
Bug (Type 1): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1129605EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1127101ALM
This is stainless steel braided fuel line.
Application:Part #: 113129651
This rubber hose goes from the oil breather to the stock air cleaner..
Application:Part #: 1129604EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 113129710D
Dual Port Manifold End Casting - Right
Application:Part #: 113129717LRG
Dual Port Gaskets without Pin Holes
Application:Part #: 1127022
This block off is used in conjunction with electric fuel pumps and mounts in place of the manual fuel pump.
Application:Part #: 1129601HD
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 311133263
Fuel injection seal large
Application:Part #: 043133247
Air Distribution Fitting
Application:Part #: N138211
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 1127101ALF
This is stainless steel braided fuel line.
Application:Part #: 1127112
This regulator adjusts the fuel pressure to you carburator.
Application:Part #: 1127103ALM
This is stainless steel braided fuel line.
Application:Part #: 113127303
The fuel pump sits on this little stand and it's also the guide for the push rod.
Application:Part #: 111198555
This kit allows you to rebuild your square top or 40hp fuel pump.
Application:
This is stainless steel braided fuel line.