Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This rod drives the fuel pump.
This rod drives the fuel pump. Used ones are fine; very rarely do they go bad. There are two different sizes. The short one is for pumps that are tilted and the long ones are for the rest. Short rods and tilted pumps are found on engines with alternators. Note: The point goes down.
Bug (Type 1): 1600
Bus (Type 2): 1600
Ghia: 1600
Thing (Type 5): 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 1127101ALF
This is stainless steel braided fuel line.
Application:Part #: 1129601HD6
This is a replacement air cleaner for the Weber IDF.
Application:Part #: VCP12
This is a rubber plug that is used to plug off vacuum.
Application:Part #: 1127100
Hose Clamp for 5mm hose
Application:Part #: 111127591A
Fuel Line Grommet 8mm
Application:Part #: 1127103ALM
This is stainless steel braided fuel line.
Application:Part #: 1129729BKKIT
Dual Port Installation Kit utilizing Black Urethane Boots
Application:Part #: 1129710
EMPI Single HPMX/IDF Manifold for Type 1 engines
Application:Part #: 1129604EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1129025
This is a new aftermarket UNIVERSAL intake manifold for Dual Port Engines. You can use a 30 Pict1 or 34Pict3 Carburetor. We have had major icing problems with this part and prefer stock manifolds.
Application:Part #: 1129606
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 113129620
This is a replacement paper element for the stock air cleaner..
Application:Part #: 113129701K
Single Port, Intake Manifold, 1500-1600cc, 30mm Base
Application:Part #: 311133261A
These o-rings should be replaced whenever you replace a fuel injector, or if they are old and cracked.
Application:Part #: 1127022
This block off is used in conjunction with electric fuel pumps and mounts in place of the manual fuel pump.
Application:Part #: 113127521AWG
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:
This rod drives the fuel pump.