Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This regulator adjusts the fuel pressure to you carburator.
This regulator adjusts the fuel pressure to you carburator. It prevents fuel from blowing by the needle and seat, flooding your motor with gas. This is crucial when running an electric fuel pump.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 043133241
These two boots connect the intake manifold with the end casting on a stock dual port 1600cc engine.
Application:Part #: 111127591
Fuel Line Grommet 6mm
Application:Part #: 1129717
These gaskets are for upright dual port engines.
Application:Part #: 113129651
This rubber hose goes from the oil breather to the stock air cleaner..
Application:Part #: 1129708
This pair of aluminum end castings are for use with a center section manifold.
Application:Part #: VCP18
This is a rubber plug that is used to plug off vacuum.
Application:Part #: 113129701K
Single Port, Intake Manifold, 1500-1600cc, 30mm Base
Application:Part #: 1129621
Oval Gauze Rubber Flange Air Cleaner for Stock VW Carb
Application:Part #: 111127521A
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 1129601HD
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 1129611
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 1129729
These boots can be put on without taking the intake manifold apart and should be used only in an emergency.
Application:Part #: 311133261A
These o-rings should be replaced whenever you replace a fuel injector, or if they are old and cracked.
Application:Part #: 1129710
EMPI Single HPMX/IDF Manifold for Type 1 engines
Application:Part #: 1127108ALF
This is stainless steel braided fuel line.
Application:Part #: 111127541A
6mm Fuel Line Union Nut
Application:
This regulator adjusts the fuel pressure to you carburator.
