Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This stock oil filler and cap has been chromed.
This stock oil filler and cap has been chromed. Never plug the draft tube! The crankcase relieves it's pressure through the draft tube. If you plug the tube, oil will just blow out somewhere else. Note: Always run a dump tube boot on the end of the tube or your engine will eat dirt. On most off-road cars we put on the oil filler that does not have a down tube. In doing this it is real important that you run a breather filter. We usually run a hose up to the filter and mount it above the engine. On street cars we run the filler that has a tube.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 311115107AK
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1115183RD
This plate is made out of a solid piece of aluminum. Red
Application:Part #: 1115450PL
The oil filler extension screws into the generator stand and comes with a fitting to vent the crankcase.
Application:Part #: 111115175A
This screen fits in the sump around the pick up tube.
Application:Part #: 1117022
Mesa coolers are the state of the art oil coolers.
Application:Part #: 1117108
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115464
This air filter is made to protect the crankcase.
Application:Part #: 1115457RD
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Red
Application:Part #: 111115451
This rubber collar goes around the dump tube that comes from the generator stand.
Application:Part #: 021115311
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 1119031
Replacement fan
Application:Part #: 1115142HD
This oil pump cover comes with a threaded boss.
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117113
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler.
Application:Part #: 111117021ERB
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 111115111A
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application: