Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need. Always use teflon tape on your fittings. Whatever you do, don't "muscle" them in, especially the 90 degree fitting on the case. We like to use quick fittings by the oil pump and case. If you use quick fittings, you won't have to cut hoses when you pull the engine.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1115457
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 1115140
This plug is used for plugging the outlet passage on an oil pump when full flowing oil pump. 1/4 NPT
Application:Part #: 068115561B
Oil Filter use in place of HP1
Application:Part #: 1115485CH
A stock cap that has been chromed for looks..
Application:Part #: 1117023
Mesa coolers are the state of the art oil coolers.
Application:Part #: 1117102ALF
These fittings are used for the stainless steel hose.
Application:Part #: 1117007
This is the high-temp/pressure hose used for routing oil to coolers and filters.
Application:Part #: 111115175A
This screen fits in the sump around the pick up tube.
Application:Part #: 111115131A
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1115458
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 1117109B
Billett Oil Cooler Block Off
Application:Part #: N110062
Some of the more common nuts you might need..
Application:Part #: 1115610RD
Billet Dipstick, Red
Application:Part #: 113117303
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1115449RD
Replacement Oil Cap Billet Red
Application:Part #: 111115107AHD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
