Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This stock oil cooler cools the hot oil coming from the engine.
This stock oil cooler cools the hot oil coming from the engine. We recommend the doghouse style over the earlier one because the hot air exits the cooler and goes outside the engine compartment. The earlier cooler allows the hot air to go over the #3&4 cylinders, an inadequate way of cooling. Note: When installing the fan shroud over the doghouse cooler you should wrap a piece of foam over the top of the cooler to insure that air from the fan goes through the cooler and not around it. When it comes to oil cooler seals, we suggest you give us a call.
Bug (Type 1): 71-79
Bus (Type 2): 71
Ghia: 71-74
Thing: 73-74
Race/Off-Road: 71-79
No customer reviews for the moment.
Part #: N110623
Some of the more common nuts you might need..
Application:Part #: 1115449BL
Replacement Oil Cap Billet Blue
Application:Part #: 1115458
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 1117103
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 311115107HD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1117022
Mesa coolers are the state of the art oil coolers.
Application:Part #: 111115107B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 111115161
These nuts prevent oil from leaking around the oil pump studs.
Application:Part #: 1115183
This plate is made out of a solid piece of aluminum.
Application:Part #: 1115106
A great way to increase the oil capacity of your engine is to bolt on a deep sump.
Application:Part #: JC22250
Jaycee Billet Oil Cap with Breater -10 AN Fitting, Red
Application:Part #: 1117105ALM
These fittings are used for the stainless steel hose.
Application:Part #: N121051
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1115457BK
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Black
Application:Part #: 111115107AKS
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 113115175
This screen fits in the sump around the pick up tube.
Application:
This stock oil cooler cools the hot oil coming from the engine.
