Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
It's super compact, light weight and easy to mount on Buggies or Sand rails.
It's super compact, light weight and easy to mount on Buggies or Sand rails. Comes complete with rod ends and boots, but it doesn't come with tie rods. This rack should only be used on light weight Buggies and sand rails; not for Bajas.
Race/Off-Road: All
No customer reviews for the moment.
Part #: 113415651SLV
Complete Steering wheel Kit, Ivory
Application:Part #: 175419341A
Steering Column Bearing Bushing, Upper
Application:Part #: 113415802B
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 1415802C
This is a great way to dress up the front end of your car.
Application:Part #: 113415801
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 111415410
Black Steering Box and Shaft Coupler Set
Application:Part #: 6415812B
Tapered Chromoly Bung, mainly used for fabricating Tie Rods on Offroad/Race Applications. Thread 3/4"-16 RH
Application:Part #: 113415813
These are the ball joints on the tie rods.
Application:Part #: 1415802
This is a great way to dress up the front end of your car.
Application:Part #: 141564914SR
These slick steering wheels have black hand-stitched, leather-grained vinyl grips with black or silver anodized aluminum spokes with machined racing holes..
Application:Part #: N111642
Steering Wheel To Steering Shaft Retaining Nut
Application:Part #: 131415811
These are the ball joints on the tie rods.
Application:Part #: 113415607A
Steering Wheel to Firewall Grommet
Application:Part #: 111415417
This is a rubber "donut" that connects the steering shaft to the steering box.
Application:Part #: 6415660
This billet aluminum steering wheel is precision machined and finished polished for a real shine.
Application:Part #: 113425117
It is for the steering damper. If yours is bad then the steering damper will be sloppy, rendering the damper useless. It will need to be pressed out and pressed in.
Application:
It's super compact, light weight and easy to mount on Buggies or Sand rails.
