Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N141212
These are the latches that hold the popout frame out.
Application:These scrapers found on convertibles are for the rear quarter windows. Putting them in is a real chore.
Bug (Type 1): 66-79
No customer reviews for the moment.
Part #: 151837627
For convertibles, this is the upper pin that the vent wing pivots on.
Application:Part #: 113847131BBK
This is the welt that goes around the rear popout windows.
Application:Part #: 113853321D
The front door window rolls up and down between these two rubber seals.
Application:Part #: 151837629
Vent Wing window Upright Seal Bug (Type 1): 10/52-64
Application:Part #: 151871353C
This seal goes on the windshield post to seal the vent wing.
Application:Part #: 1837433
This kit comes with everthing you need to eliminate your vent window, tempered glass, felt window channels, inner and outer snap in scrappers.
Application:Part #: 111837502H
This is the mechanism that makes the window go up and down.
Application:Part #: 151847571A
Glass to Sash Rubber for Rear Quarter window, Convertible
Application:Part #: 111837361
This is the channel that the front door windows roll up into.
Application:Part #: 113845321CL
This seal goes around the side window that is stationary (does not have a frame).
Application:Part #: 151871357B
This seals the top to the window(s).
Application:Part #: 1837475A
This kit comes with everthing you need to eliminate your vent window, tempered glass, felt window channels, inner and outer snap in scrappers.
Application:Part #: 111845101H
These are cut from safety glass as required by law.
Application:Part #: 151847352C
These are wedge to seal the coners on the front door and quarter windows, where the metal frames meet the scrapers.
Application:Part #: 151837633A
Vent Wind Upper Pivot Screw, Convertible
Application:Part #: 111837571
Door Window Lift Channel
Application: