Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The cam rides in these bearings.
The cam rides in these bearings. We have tried German and Brazilian brands and have had good luck with both. If you are running a 1776cc or bigger engine you should run double thrust bearings. Note: The bearings are installed with the widest one towards the pulley and the narrowest one towards the flywheel. Use oil on the bearings before installing the cam.
No customer reviews for the moment.
Part #: 113109612A
The two outside valves in the head are the exhaust valves, they let the burned fuel out of the head.
Application:Part #: 1109603
Stainless steel valves are used in the big valve heads.
Application:Part #: 113101401
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 113109651A
These springs return the valves back to their seats.
Application:Part #: 1109611
Stainless steel valves are used in the big valve heads.
Application:Part #: 113109641B
These springs return the valves back to their seats.
Application:Part #: 1109006
These gears give just a hair more horsepower.
Application:Part #: 1109642
If you are going to run dual springs we suggest you use these valve spring retainers as well.
Application:Part #: 1109401125SC
1.25 Ratio Rockers Pro SCAT
Application:Part #: 113101399B
Rocker Arm Stud
Application:Part #: 1109341EA
Push Rod Tubes, Adjustable Big-Mouth, Each
Application:Part #: JC91010
Jaycee Leak proof Pushrod Tubes, Red
Application:Part #: 1109451
This style of adjusting screw has a ball with a flat side on the end.
Application:Part #: 1109601
These caps go on the ends of the valve.
Application:Part #: 1109460
These shims are used under the rockers to set the geometry.
Application:Part #: 1109338
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:
The cam rides in these bearings.
