Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Engle cams are one of the most popular performance camshafts made for the air-cooled Volkswagen.
Engle cams are one of the most popular performance camshafts made for the air-cooled Volkswagen. All shafts are ground from new billet castings and many sizes and profiles are available. The cams listed below are designed for use with stock ratio rockers. Note: Always check for lifter boss clearance. We have many years of experience with performance Bug engines, so please call for advice when choosing a cam. Never use any of these cams with stock carburetion. Engle cams do not come with a gear or bolts. We carry more Engle cams then what is listed here so if you don't see what you are looking call.
Bug (Type 1): 1600
Bus (Type 2): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 1109460
These shims are used under the rockers to set the geometry.
Application:Part #: 1109335
These stock-style tubes are made of stainless steel.
Application:Part #: 1109401125
Rocker Arms, High Ratio 1.25, w/Bushing, Set
Application:Part #: N111521
This screw rides against your valve, opening and closing it.
Application:Part #: 113109612
The two outside valves in the head are the exhaust valves, they let the burned fuel out of the head.
Application:Part #: 11310140108
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 113109301D
These rods link the cam to the valves. These are very costly so please call for good used ones.
Application:Part #: 113109612A
The two outside valves in the head are the exhaust valves, they let the burned fuel out of the head.
Application:Part #: JC91020
Jaycee Leak proof Pushrod Tubes, Black
Application:Part #: 111109611A
Exhaust Valve 36 HP
Application:Part #: 111101401B
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 1109642
If you are going to run dual springs we suggest you use these valve spring retainers as well.
Application:Part #: 1109605
Stainless steel valves are used in the big valve heads.
Application:Part #: 1109415
These shims are used under the rockers to set the geometry.
Application:Part #: 111109335
These tubes go from the case to the heads to house the push rods.
Application:Part #: 1109002USA
Cam Gear without bolts USA Made
Application: