Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are some of the most common jets used.
These are some of the most common jets used. We'll be happy to help you with your jetting, but we'll need to know some details. So before you call us, get some information ready about your engine, like size, compression ratio, etc.
Bug (Type 1): IDA
Ghia: IDA
Race/Off-Road: IDA
No customer reviews for the moment.
Part #: 1129511A
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 1129510A
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 1129802
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 1129504115
These are some of the most common jets used. Sold individually.
Application:Part #: 113129881A
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 1129506PRO
Velocity Stack Covers, for 48IDA/EPC 48 & EPC 51 Carbs, Pair Inside Diameter is 3.850"
Application:Part #: 1129512
Empi Hex Bar Linkage for 48/51 EPC and 48 IDA (works with and without Air Cleaners)
Application:Part #: 113129391
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 111129493A
Steel Vacuum Line junction between Vacuum Advance and carburetor
Application:Part #: 113129031K
This is what delivers gas and air to the engine.
Application:Part #: 113198575URP
This kit comes with the gaskets, the needle and seat, and accelerator pump diaphragm for the carburetor..
Application:Part #: 1129510
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 112920330
30mm Main Venturi for 40IDF or HPMX
Application:Bug (Type 1); IDF
Bus (Type 2); IDF
Type 3; IDF
KG; IDF
Thing; IDF
Off Road; IDF
Part #: 1129039
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 1129026
34 Pict Carburetor spacer plate, measures 3/8" thick with 2 11/16" hole to hole
Application:Part #: 1129505
Empi 40/44/48 IDF & HMPX Extended Emulsion Tube Holder
Application:
These are some of the most common jets used.
