Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are some of the most common jets used.
These are some of the most common jets used. We'll be happy to help you with your jetting, but we'll need to know some details. So before you call us, get some information ready about your engine, like size, compression ratio, etc.
Bug (Type 1): IDA
Ghia: IDA
Race/Off-Road: IDA
No customer reviews for the moment.
Part #: 1129510
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 211129493
Steel Vacuum Line junction between Vacuum Advance and carburetor
Application:Part #: 1129802
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 1129510A
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 1129512
Empi Hex Bar Linkage for 48/51 EPC and 48 IDA (works with and without Air Cleaners)
Application:Part #: 111129493A
Steel Vacuum Line junction between Vacuum Advance and carburetor
Application:Part #: 112950505IDA
Stack Hold Down Tab
Application:Part #: 1129304040
These are some of the most common jets used. Sold individually.
Application:Part #: 113129027
This is what delivers gas and air to the engine.
Application:Part #: 1129199175
Needle Valve for 40/44 HPMX (EMPI), 40-48 IDF (Weber) 1.75mm
Application:Part #: 1129199050
Accelerator Pump Jets for 40/44 HPMX (EMPI), 40-48 IDF (Weber) 0.50
Application:Part #: 1129508
These are some of the most common jets used.
Application:Part #: 1129504115
These are some of the most common jets used. Sold individually.
Application:Part #: 1129026
34 Pict Carburetor spacer plate, measures 3/8" thick with 2 11/16" hole to hole
Application:Part #: 112950508IDA
Auxiliary Venturi
Application:Part #: 1129405120
These are some of the most common jets used. Sold in pairs.
Application:
These are some of the most common jets used.
