Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:These are some of the most common jets used. Sold in pairs.
These are some of the most common jets used. We'll be happy to help you with your jetting, but we'll need to know some details. So before you call us, get some information ready about your engine, like size, compression ratio, etc. Sold in pairs.
No customer reviews for the moment.
Part #: 113129191G
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 112950502IDA
Stack Hold Down Screw and Washer
Application:Part #: 113129031K
This is what delivers gas and air to the engine.
Application:Part #: 1129199200
Needle Valve for 40/44 HPMX (EMPI), 40-48 IDF (Weber) 2.00mm
Application:Part #: 111129405C
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 113129323C
Here are some of the replacement parts for your stock carburetor.
Application:Part #: 1129306050
These are some of the most common jets used.
Application:Part #: 112950504IDF
Idle Jet O-ring for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 1129199055
Accelerator Pump Jets for 40/44 HPMX (EMPI), 40-48 IDF (Weber) 0.55
Application:Part #: 1129039E
Empi Dual 40mm Carburetor complete setup
Application:Part #: 1129324
These are some of the most common jets used.
Application:Part #: 112950505IDF
Throttle Shaft Lock Tab Washer for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 1129040
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 1129517
Linkage Ball End Bushings, Pair
Application:Part #: 1129201300
EPC 48/51 3.0 Needle and Seat IDA 300
Application:Part #: 1129044
We've found that dual carbs work better than any single carburator set up.
Application: