Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This disc transfers the power from the motor to the transmission. To check an old clutch disc, use a 7mm wrench and try to put the open end over the thickness of the disc. If the wrench goes on, you should think about replacing the disc. There are basically two types of discs, ridged and one with springs. The spring type has a little give before it engages, reducing the shock on the transmission. The ridged discs are good for dirt cars or someone who wants to race at the drag strip.
Bus (Type 2): 72-73
No customer reviews for the moment.
Part #: 111141031F
This disc transfers the power from the motor to the transmission.
Application:Part #: 111141165A
Also known as a throw-out bearing, this bearing's function is to disengage the clutch.
Application:Part #: 1141701A
This heavy duty arm is a good idea if you need a new clutch arm.
Application:Part #: 1198026
This kit contains a quality brass bushing, a clutch return spring and retaining clips needed to install the throw-out bearing arm in the transmission.
Application:Part #: 311141025C
The clutch cover is also known as a pressure plate.
Application:Part #: 1141033
Cushion Clutch Disc - 200mm
Application:Part #: 2141701B
This heavy duty arm is a good idea if you need a new clutch arm.
Application:Part #: 1141024
These are hardend bolts, 10.9 instead of the stock 8.8.
Application:Part #: 1141025
Heavy Duty Clutch Pressure Plate - 1700lbs. This is made by KEP
Application:Part #: 113141181B
Guide Sleeve
Application:Part #: 111141177AS
These clips hold the throw-out bearing to the arm.
Application:Part #: 111141723A
Return Spring For Cross Shaft
Application:Part #: 1141030
200mm 6 puck Clutch Disc
Application:Part #: 361141719HD
Clutch Cable Arm Forged for 20mm Cross shaft
Application:Part #: 251721401A
This master cylinder pushes fluid to the slave cylinder on the clutch..
Application:Part #: 311141025E
The clutch cover is also known as a pressure plate.
Application:
