Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This heavy duty arm is a good idea if you need a new clutch arm. See URETHANE CLUTCH ARM BUSHING KIT for installation. Note: Before installing, try the splined arm to make sure it fits well. If it doesn't, you'll need to do a little spline cleaning with a file.
Bus (Type 2): 71-75
Race/Off-Road: All
No customer reviews for the moment.
Part #: 113198026
This kit contains a bushing, a clutch return spring and the retaining clips to install the throw-out bearing shaft in the transmission.
Application:Part #: 211141025D
The clutch cover is also known as a pressure plate.
Application:Part #: 1198026
This kit contains a quality brass bushing, a clutch return spring and retaining clips needed to install the throw-out bearing arm in the transmission.
Application:Part #: T1141032
Clutch Alignment Tool
Application:Part #: 113141701C
This shaft holds the throw-out bearing in place.
Application:Part #: 211141031G
This disc transfers the power from the motor to the transmission.
Application:Part #: 2141701C
This heavy duty arm is a good idea if you need a new clutch arm.
Application:Part #: 1141025CH
HD Pressure Plate 1700 lbs China
Application:Part #: 211703291
Clutch Pedal Return Buffer
Application:Part #: 211141025A
Clutch Cover, 12 volt 200mm, 9 spring
Application:Part #: 1141030
200mm 6 puck Clutch Disc
Application:Part #: 2141701A
This heavy duty arm is a good idea if you need a new clutch arm.
Application:Part #: 1141701A
This heavy duty arm is a good idea if you need a new clutch arm.
Application:Part #: 029141031A
This disc transfers the power from the motor to the transmission.
Application:Part #: 002141701
This shaft holds the throw-out bearing in place.
Application:Part #: 111721349
Clutch Cable Adjusting Nut, Acorn nut Style, includes backing nut
Application:
