Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The generator strap goes around the generator and holds the generator to the stand..
The generator strap goes around the generator and holds the generator to the stand.
Bug (Type 1): -66
Bus (Type 2): -66
Ghia: -66
No customer reviews for the moment.
Part #: 111903137B
This is the belt that turns the generator.
Application:Part #: 1119031BHD
Motors with high horsepower and motors that rev fast run the risk of exploding a stock fan.
Application:Part #: 111903221A
These are the bearings and brushes for your generator.
Application:Part #: 113971901A
This boot goes over the wire and the terminal of the generator or alternator.
Application:Part #: 1903109CH
This is a stock generator pulley that has been chromed.
Application:Part #: 111903515A
These are the bearings and brushes for your generator.
Application:Part #: 113119031A
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: 1903137
Replacement belt for Serpentine belt driven Alternator or Generator
Application:Bug (Type 1); 40-1600
Bus (Type 2); 40-1600
KG; 40-1600
Thing; All
Offroad; 40-1600
Part #: GR11XCO
Generators supply the battery with voltage.
Application:Part #: 1903109BL
Billet Alt/Gen Pulley Blue
Application:Part #: 043903109GR
This is the pulley on the generator that holds the belt.
Application:Part #: 1301103
This bushing is made to mate mismatched bellhousing and starter combinations.
Application:Part #: GR15XCO
Core Charge Generators supply the battery with voltage. Rebuilt
Application:Part #: 1903532
This is just a cover that fits around a 30amp generator to give it that chrome look.
Application:Part #: 111903137E
This is the belt that turns the generator.
Application:Part #: 1903141B
This strap is much stronger than the stock strap, not that you need a super strap to hold the alternator or generator.
Application:
The generator strap goes around the generator and holds the generator to the stand..
