Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This is what starts the car.
This is what starts the car. It usually quits the furthest place from home. To bench test a starter is tough, as they can work but are weak. In other words, it will work on the bench, but as soon as it has the drag of the engine on it, it won't. The way we test starters is in the car with a remote starter button (a push button with two long wires). Disconnect the battery. Hook up one of the wires to the big post that the battery cable is hooked to and the other wire to where the push-on wire is located. Now connect the battery back up and make sure the E-brake is on and the car is out of gear. Push the remote starter button. If the engine turns over the starter is good, and if it doesn't, it's bad. If you find the starter works with the remote starter but not with the key, call us. You might need a hard start relay or a new electrical part in the ignition switch. Some starters are sold on exchange.
Bug(Type 1): -66
Bus(Type 2): -66
Type 3: -66
Ghia: -66
Race/Offroad: 6 volt
No customer reviews for the moment.
Part #: 042903109AGR
VW Generator Pulley, 6V
Application:Part #: 043903109BR
This is the pulley on the generator that holds the belt.
Application:Part #: 1903109BOBL
Billet Pulley Outer Half Blue
Application:Part #: 1903532
This is just a cover that fits around a 30amp generator to give it that chrome look.
Application:Part #: 111119131
Fan Hub Washer
Application:Part #: GR15NCH
Generators supply the battery with voltage. CHINA
Application:Part #: 1903109BLT
Black Billet Alternator/Generator Pulley Kit
Application:Part #: 111903137B
This is the belt that turns the generator.
Application:Part #: 111119123A
Cooling Fan Hub
Application:Part #: 1301103
This bushing is made to mate mismatched bellhousing and starter combinations.
Application:Part #: SR17XCO
This is what starts the car.
Application:Part #: 211903183
This is the bell shaped spacer that hold the outer half of the generator pulley on.
Application:Part #: 1903141B
This strap is much stronger than the stock strap, not that you need a super strap to hold the alternator or generator.
Application:Part #: JC86000
Jaycee Billet Alternator Pulley, Blue
Application:Part #: N127051
This is the pulley on the generator that holds the belt.
Application:Part #: GR11X
Generators supply the battery with voltage.
Application: