Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This aftermarket chrome cap nut and spacer hold the alternator/generator pulley on.
This aftermarket chrome cap nut and spacer hold the alternator/generator pulley on. Make sure you use a total of 8 shims or you will destroy the pulley and possibly the alternator/generator. See stock GENERATOR PULLEY for installation.
Bug (Type 1): 36hp-1600
Bus (Type 2): 36hp-1600
Ghia: 36hp-1600
Thing: 36hp-1600
Race/Off-Road: 36hp-1600
No customer reviews for the moment.
Part #: AL82NCH
This unit supplies the battery with voltage.
Application:Part #: N127051
This is the pulley on the generator that holds the belt.
Application:Part #: GR15XCO
Core Charge Generators supply the battery with voltage. Rebuilt
Application:Part #: 1903109BOBL
Billet Pulley Outer Half Blue
Application:Part #: 111903137B
This is the belt that turns the generator.
Application:Part #: 113119031B
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: 111903515A
These are the bearings and brushes for your generator.
Application:Part #: SR15NC
This is what starts the car.
Application:Part #: SR11X
This is what starts the car.
Application:Part #: AL82NC
This unit supplies the battery with voltage.
Application:Part #: 113903141A
The generator strap goes around the generator and holds the generator to the stand..
Application:Part #: 1903531
On all upright motor, this plastic cover goes over the top opening of the generator to keep dirt out.
Application:Part #: 1903141
This chrome strap holds the alternator or generator to the stand.
Application:Part #: 111903137D
This is the belt that turns the generator.
Application:Part #: JC86000
Jaycee Billet Alternator Pulley, Blue
Application:Part #: 1301103
This bushing is made to mate mismatched bellhousing and starter combinations.
Application:
This aftermarket chrome cap nut and spacer hold the alternator/generator pulley on.