Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These panels go in the dash so you can install gauges.
These panels go in the dash so you can install gauges. You'll have to trim some metal behind the panel in order to put your gauges in.
Bug (Type 1): 58-
Race/Off-Road: 58-
No customer reviews for the moment.
Part #: 1702001
This bar kit keeps the transmission forks from flexing when you burn out.
Application:Part #: N102461
This is a list of the most common bolts used on a car..
Application:Part #: 6903137
This pulley is a lot smaller than a stock pulley.
Application:Part #: 111127521A
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 1903109BOBL
Billet Pulley Outer Half Blue
Application:Part #: 6251015CC
Off-Road Competition exhaust systems with stainless steel mufflers.
Application:Part #: 021256091M
These are your source of heat.
Application:Part #: 265809167A
Crew Cab Rocker Panel up to Beltline, Left Side, 840mm tall
Application:Part #: 1601055
Empi Dish, Silver, 5x112, 5.5"x15"
Application:Part #: 311837657A
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:Part #: 211829193
It seals the rear cargo door and has to be glued in.
Application:Part #: N141243
License Plate Lens Screws, Sold as a pair
Application:Part #: 1115458
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 111953041A
This is the whole unit, lens and bulb holder.
Application:
These panels go in the dash so you can install gauges.
