Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These pins hold the flywheel in place on the crankshaft.
These pins hold the flywheel in place on the crankshaft. Should the hole that these go into become ovaled, throw away the crank or flywheel, whichever one is ovaled. Attempts to fix them are risky, since it is difficult and expensive to make the surfaces flat and true.
Bug (Type 1): 61-79
Bus (Type 2): 60-71
Type 3: 62-73
Ghia: 61-74
Thing: 73-74
Race/Off-Road: 61-79
No customer reviews for the moment.
Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 111105283
Flywheel Shim 25-36HP, .30mm (0.012")
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 113105231B
This gear matches up with the brass gear that is on the crank.
Application:Part #: 113105271BCO
These flywheels have been reconditioned and are sold on an exchange basis.
Application:Part #: 1105258
This is a stock, zinc-plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center.
Application:Part #: 111105245
This seal goes behind the flywheel.
Application:Part #: 113105219
Crankshaft Spacer Ring
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 111105263A
The bolt that holds the crankshaft pulley on.
Application:Part #: 311105431A
Wrist Pin Bushing.
Application:Bug (Type 1); 1300-1600
Bus (Type 2); 1300-1600
Type 3; 1300-1600
KG; 1300-1600
Thing: 1300-1600
Offroad/Race; 1300-1600
Part #: 111105401CO
Most people don't realize that these are one of the most important parts in the motor.
Application:Part #: 111105313A
It's really a bolt, but that's what everybody calls it.
Application:Part #: 1105401
I-Beam Rod, 5.394" VW Journal (Empi 3/8" Rod Bolts) Set of 4
Application:Part #: 111105271CO
Core
Application:Part #: 111105433
Wrist Pin Bushing.
Application:Bug (Type 1); 40hp
Bus (Type 2); 40hp
KG; 40hp
These pins hold the flywheel in place on the crankshaft.