Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This the cable you pull to release the front hood.
This the cable you pull to release the front hood. On KG, it also fits the deck lid.
Bug (Type 1): 49-67
Ghia: 56-74
Race/Off-Road: -67
No customer reviews for the moment.
Part #: 113609163
You will find this little plug in the backside of the rear backing plates on cars 1968 and later.
Application:Part #: GR15NCH
Generators supply the battery with voltage. CHINA
Application:Part #: 688110
Lowback Roadster Style Seats, Black Vinyl
Application:Part #: 151871373A
This is a sleeve that goes in the front window frame for the guide pins to sit in.
Application:Part #: 211707136B
These brackets hold the bumpers on.
Application:Part #: N119511
Sunroof Cover and Headliner Finishing Screw
Application:Part #: 113863374D
These rear kick panels go between the rear seat frame and floor.
Application:Part #: NGK D7EA
This Spark plug is only used for Racing or Competition vehicles due to the size of the Spark Plug; Dimensions Below Thread Pitch: 12mm x 1.25mm, Thread Length: 19mm (3/4") Verify that the Thread Pitch and length is compatible with your heads if you have any questions call and ask prior to ordering.
Application:Part #: 211615108CO
Front calipers hold the brake pads that stop the rotor, which in turn stops your vehicle.
Application:Part #: 039101061D
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 133698002
This kit has all the springs, pins and keepers for drum brakes.
Application:Part #: 1105251ALRD
Aluminum Stock Crankshaft Pulley Red
Application:Part #: 1301048I
Padded Trans Support Front Kit
Application:Part #: 111837211
This seal goes between the handle and the body.
Application:Part #: 021256251A
Gasket
Application:Part #: 1109453EA
Replacement Adjustment Screw and Nut for Ratio Rockers
Application:
This the cable you pull to release the front hood.