Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These joints are located in the ends of the control arms.
These joints are located in the ends of the control arms. You will need a press and some special tools to replace the joints on a standard Bug. Note: Remove the boot before you press the joint in the arm and then put it back on after. There are four ball joints per car on a standard Bug. Super Beetle ball joints just bolt on and there is only one per side.
Thing: 1973-74
No customer reviews for the moment.
Part #: 211947111B
A dome light comes in handy when trying to find that missing piece of clothing.
Application:Part #: 141564913SR
Rally GT, Silver, 3-Spoke, 13" Diameter, 3" Dish
Application:Part #: 231069411
These rubber kits are for restoring your camper style windows..
Application:Part #: 211801562
Inner Rear Wheel Well, Right
Application:Part #: 111957357
Instrument Light Bulb Holder, Screw Connector
Application:Part #: 6129610
This is the best air cleaner for those of you playing in wet and muddy off-road areas.
Application:Part #: 1885401CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 113425021
This little shock goes from the center pin arm or pitman arm to the front axle beam or frame.
Application:Part #: 1129729
These boots can be put on without taking the intake manifold apart and should be used only in an emergency.
Application:Part #: 113837639A
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:Part #: 6707302KIT
Rear HD baja bumper kit. THIS DOES NOT COME WELDED TOGETHER.
Application:Part #: 141945227C
These are the rear lenses for the tail light, brake light and turn signal light.
Application:Part #: 1501581
Chromoloy Rear Hub 5/130mm for Short Axle (each)
Application:Part #: 022109612D
The two outside valves in the head are the exhaust valves, they let the burned fuel out of the head.
Application:Part #: 111698173A
This is the kit to rebuild the master cylinder.
Application:
These joints are located in the ends of the control arms.
