Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These lifters are made by Engle and have a small hole in the end of them that allows oil to be pumped onto the cam lobe and lifter face.
These lifters are made by Engle and have a small hole in the end of them that allows oil to be pumped onto the cam lobe and lifter face. These are nice when using dual valve springs. Sold as a set of 8
No customer reviews for the moment.
Part #: 211955225B
Spring loaded Safari wiper pivots
Application:Part #: 6721357
Heim End for EMPI Slave with 3/8" Ball
Application:Part #: 6501149108AO
Overboot Only for 930 CV, Each Offroad applications
Application:Part #: N115252
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 251807311D
Chrome Rear Bumper for Vanagons
Application:Part #: 1601065BK
Sprintstar 8 Spoke, Gloss Black w/ Polished Lip, 4x130, 5"x15"
Application:Part #: 1080124
Underdash Gauge Panel
Application:Part #: 113109021GBR
We've had no luck with regrinds, therefore we sell only new camshafts.
Application:Part #: 1119027CH
This small fan shroud came on the 36hp motor.
Application:Part #: 021298051A
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 1119317BK
Cool tins are must for those of you with high performance exhaust systems without heater boxes.
Application:Part #: ECX25B
ECP part numbers are for the regular crimp style electrical ends.
Application:Part #: 152701062B
Floor Plate, Right, Convertible
Application:Part #: 211611775B
This flex hose goes from the metal brake line on the rear fork to the metal brake line on the axle tube.
Application:Part #: 1827705
Just like the front mexican style seal, this seal clips to the deck lid instead of the body..
Application:Part #: 113863013
These are the interior panels.
Application:
These lifters are made by Engle and have a small hole in the end of them that allows oil to be pumped onto the cam lobe and lifter face.
