Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This bushing wraps around the front shift rod.
This bushing wraps around the front shift rod. If your shifter is sloppy this is usually the reason. On a Bus before you start ripping apart the shifter, crawl under the front and find the shift rod, follow it to the shifter and find the hanger and bushing. Push the rod up and down, if it moves it's bad. On a Bug or a Type 3, take out the shifter and use a pair of pliers and pull up and down on the shift rod. If it moves it is bad. When installing the new one, use white grease on the rod where it rides in the bushing. On a Bus the rear bushings can only be replaced if the transmission has been removed.
No customer reviews for the moment.
Part #: 111701263
This bushing wraps around the front shift rod.
Application:Part #: 1701259A
Delrin shift rod bushing
Application:Part #: 6857651
Billet Deluxe Whip Antenna Mount for 1.75" Tubing
Application:Part #: 113611724C
These are the metal brake lines found throughout the car.
Application:Part #: 151867500
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 311721509
This will replace a worn out pivot for the stock accelerator assembly, to replace this pivot you will have to remove the whole pedal assembly.Make sure you use some white grease on the pin where it mounts to the pedal to insure that it lasts longer..
Application:Part #: 211837621
Vent Wing Gutter Left
Application:Bus (Type 2); 55-67
Part #: 211261235A
The heater hose goes from the fan shroud to the heater boxes.
Application:Part #: N117011
Sunroof Cover and Headliner Finishing Washer
Application:Part #: 113955544IV
Radio Knobs, Ivory, Set of 2
Application:Part #: 6129603
This is the best air cleaner for those of you playing in wet and muddy off-road areas.
Application:Part #: 111899117
Body Pad (2), Under Rear Seat
Application:Part #: 111405273
These are the rubber snubbers that are in between the front torsion bar arms.
Application:Part #: 1129034
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:Part #: 3251005
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 113105401ARC
Most people don't realize that these are one of the most important parts in the motor.
Application:Part #: 151871093
This is the bow over the rear window.
Application:Part #: 1129506PRO
Velocity Stack Covers, for 48IDA/EPC 48 & EPC 51 Carbs, Pair Inside Diameter is 3.850"
Application:
This bushing wraps around the front shift rod.